鸿森主营产品:纯实木门厂家 | 实木进户门 | 原木进户门 | 铜木门厂家 | 铝木车库门 | 原木装甲门 | 电动庭院门 | 浙江双雄门业

行业资讯

当前位置:网站首页 > 新闻动态 > 行业资讯

  • 遥控门的遥控器配置
  • 本站编辑:杭州鸿森门业有限公司发布日期:2019-06-01 11:28 浏览次数:
1、遥控器要与你的接收机是属于同一个频段的;
2、目前市场使用的频段有315MHz、433MHz和2.4GHz的。在购买时会告诉你对应的频点的的;
3、如果是单纯购买遥控器配合原来的接收机使用,那就还要先知道你的遥控器是工作在哪个频段的;
4、方法是带上你的遥控器到厂家配对,或者打开你的接收机找到电路板上有一个棕色胶包封的三只脚的陶瓷滤波器,上面的标注字符看看与第二项里面的哪一个是一致的,就按这个数值购买遥控器;
5、在查看电路板的同时,还要观察上面有一个拨码开关,记住拨码开关的位置和次序,这也是配遥控器时必须要知道的主要参数;
满足了以上的要求你就可以继续使用你的车库门自动遥控开启和关闭了。


1, the remote control and your receiver belong to the same band;
2, the band currently used in the market is 315MHz, 433MHz and 2.4 GHz. It will tell you the corresponding frequency at the time of purchase;
3, if it is simply to purchase the remote control with the original receiver, then you must first know which band your remote control is working in;
4, the method is to bring your remote control to the manufacturer's pairing, or turn on your receiver to find a three-foot ceramic filter with a brown plastic envelope on the circuit board. The marked characters on the above are to see which of the two is the same. Buy the remote control at this value;
5, while looking at the circuit board, but also observe on the top a dial code switch, remember the position and order of the dial code switch, this is the main parameter that must be known when the remote control is provided;
Fulfill the above requirements and you can continue to use your garage door automatic remote control to open and close.